Thermally driven self-healing PEDOT conductive films relying on reversible and multiple Diels–Alder interaction

Thermally healing capability of cracks and defects is important and urgent for the safe operation and life extending of electric materials and devices. Here, by the combination of thermally driven reversible Diels–Alder (DA) interaction and in-situ chemical oxidative polymerization of 3,4-ethylenedioxythiophene (EDOT), a series of intrinsically conductive poly(3,4-ethylenedioxythiophene) (PEDOT)/DA composites possess intrinsically self-healing property under low-temperature (reverse DA reaction at 100°C; DA crosslinking at 60°C) stimulus were achieved. The crosslinking DA bonding reactions are multiple from the co-existence of pre-synthesized macromolecular polyurethane attached DA units (PU-DA) and 2,4-hexadiyne-1,6-diol (DADOL) in the films. PU-DA involved in the polymerization process of EDOT to endow PEDOT with outstanding solution-processability, uniform film making, and structural self-healing capability, while DADOL was added to enhance the cross bonding between polymer chains. This work will accelerate the research and application development of intrinsically self-healing conducting polymers for commercial capacitors, antistatic coatings, implantable, printable electronics, and so on.     

MgO和Fe2O3的添加对GDCSi体系微观结构及电化学性能的影响

采用溶胶凝胶法制备Gd_0.2Ce_0.8O_3-δ +0.05%（质量分数）SiO₂（GDCSi）电解质。在GDCSi体系中加入Fe₂O₃及MgO可达到降低烧结温度的同时提高晶界电导率，并减小杂质SiO₂对氧离子在晶界处传输的阻碍的目的。将MgO和Fe₂O₃单掺杂或双掺杂在GDCSi体系中并对GDCSi基电解质的微观形貌及电性能进行研究。结果表明，所有样品主要由立方萤石结构相组成；物质的量分数4%MgO单掺杂的GDCSi-M、物质的量分数4%Fe₂O₃单掺杂的GDCSi-F以及物质的量分数2%MgO-物质的量分数2%Fe₂O₃共掺杂的GDCSi-MF均可促进GDCSi体系晶粒增长，降低晶粒间孔隙率，提高电解质的相对密度，降低晶粒电阻R_gi、晶界电阻R_gb及总电阻R_t；GDCSi-MF具有最高晶界电导率和总电导率，在400 ℃时GDCSi-MF的晶界电导率σ_gb和总电导率σ_t分别是GDCSi的10.41和1.82倍。     

Bioactive Chemical Constituents of Cercis chinensis

Chemistry of Natural Compounds -     

Fully Chemical Recyclable Poly(γ-butyrolactone)-based Copolymers with Tunable Structures and Properties

Chinese Journal of Polymer Science - The emerging chemical recyclable polymers, such as poly(γ-butyrolactone) (PGBL) and poly((R)-3,4-trans six-membered ring-fused GBL) (P((R)-M)), provide a...     

Synthesis and Applications of SAPO-34 Molecular Sieves

Silicoaluminophosphate zeolite (SAPO-34) has been attracting increasing attention due to its excellent form selection and controllability in the chemical industry, as well as being one of the best industrial catalysts for methanol-to-olefin (MTO) reaction conversion. However, as a microporous molecular sieve, SAPO-34 easily generates carbon deposition and rapidly becomes inactivated. Therefore, it is necessary to reduce the crystal size of the zeolite or to introduce secondary macropores into the zeolite crystal to form a hierarchical structure in order to improve the catalytic effect. In this review, the synthesis methods of conventional SAPO-34 molecular sieves, hierarchical SAPO-34 molecular sieves and nanosized SAPO-34 molecular sieves are introduced, and the properties of the synthesized SAPO-34 molecular sieves are described, including the phase, morphology, pore structure, acid source, and catalytic performance, in particular with respect to the synthesis of hierarchical SAPO-34 molecular sieves. We hope that the review can provide guidance to the preparation of the SAPO-34 catalysts, and stimulate the future development of high-performance hierarchical SAPO-34 catalysts to meet the growing demands of the material and chemical industries.     

二氧化硅包覆芒硝基相变储能微胶囊制备及性能表征

将四乙氧基硅烷(TEOS)和3-氨丙基三乙氧基硅烷(APTES)作为硅源,芒硝基相变储能微胶囊作为芯材,通过乳液聚合的方法制备了二氧化硅包覆的芒硝基相变储能微胶囊.测得芒硝基相变储能微胶囊的熔化焓和凝固焓分别为136.4 J/g和76.9 J/g,融化和凝固温度分别为23.6℃和17.6℃.微胶囊的核-壳结构减轻了无机水合盐固液分离程度,抑制了相分层现象的发生.在100次循环后,熔化焓为64.3 J/g,具有较好的循环稳定性,可用于热能存储等领域.     

AgAlSe2晶体高压相变的第一性原理研究

基于密度泛函理论,采用广义梯度近似法,研究了黄铜矿结构AgAlSe₂在高压下的晶体结构、晶格动力学稳定性与电子结构.结果显示:在0 GPa时AgAlSe₂的晶格参数与实验值吻合,在13.9 GPa附近,质量密度、Se-Ag键长、Se-Al键长、晶格常数a突然增大,相对晶胞体积V/V₀、晶格常数c突然减小,声子谱出现虚频,结构变得不稳定,带隙发生突变,数值呈减小趋势.表明AgAlSe₂晶体在13.9 GPa附近发生结构相变.该研究为AgAlSe₂晶体在理论上所能承受的高压提供信息支撑.     

SiO2@Gd2O3∶Tb3+核壳微球的可控合成及发光性能研究

采用简便的尿素辅助沉淀法将Gd2O3∶Tb3+成功包覆在二氧化硅微球表面合成了尺寸均匀的球形SiO2@Gd2O3∶Tb3核壳发光材料,解决了稀土发光材料普遍存在的形貌可控性差和颗粒尺寸不均一等问题.利用XRD、SEM、红外光谱和荧光光谱等表征测试了样品的形貌、结构和发光性能.SEM照片和尺寸分布图显示,SiO2@Gd2O3∶Tb3+粒子呈现均匀球形形貌,分散性良好,粒径约(608 +18) nm.XRD图谱分析表明,600℃煅烧后,壳层Gd(OH)3CO3完全转变为立方相Gd2O3,结晶性良好,无杂相生成.同时,结合红外光谱推测了SiO2@Gd2O3∶Tb3核壳微球的形成机理,并得出Gd2O3∶Tb3+壳层主要以Si-O-Gd键形式连接在二氧化硅微球表面.在240 nm紫外光激发下,SiO2@Gd2O3∶Tb3核壳微球呈现绿光发射,其中,位于540 nm处的主峰归属于Tb3+的5D4→7F5能级跃迁.不同Tb3掺杂浓度下的发射光谱表明,当Tb3+掺杂浓度为4mol;时,SiO2@Gd2O3∶Tb3+核壳微球的发射强度达到最大值,寿命为1.55 ms,色坐标位于绿色区域,展现了良好的绿光发光性能.     

静电纺丝法制备柔性SERS基底及性能研究

利用静电纺丝技术制备了聚乙烯醇(PVA)/银纳米粒子高活性SERS柔性基底.将硝酸银、聚乙烯醇按照一定比例混合配置纺丝溶液,纺丝成膜后采用紫外光照射还原法得到纳米纤维基底.采用扫描电子显微镜(SEM),透射电子显微镜(TEM),傅立叶红外光谱(FT-IR),拉曼光谱(Raman),紫外可见光谱(UV-Vis)等技术,对合成的纳米纤维基底进行表征.研究表明,银纳米颗粒呈球形分布在复合纤维中,粒径小于10 nm.以罗丹明为探针分子,硝酸银含量16 wt;,紫外光照射3 h制备的基底具备最优的SERS性能.同时将此基底应用于烟酸药品检测,拉曼检测极限可达10-5 mol·L-1.